PA6 BKV 135 DUS008 000000德國朗盛Durethan 35%玻纖增強耐沖擊注塑級尼龍6塑料（18024445500）

PA 6, 35 % glass fibers, injection molding, improved impact strength



ISO Shortname: ISO 1874-PA 6-HI, GR, 14-100, GF35

Property Test Condition Unit Standard guide value
d.a.m. cond.

Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 10200 6000
C Tensile Stress at break 5 mm/min MPa ISO 527-1,-2 170 110
C Tensile Strain at break 5 mm/min % ISO 527-1,-2 3 7
C Charpy impact strength 23 °C kJ/m² ISO 179-1eU 100 110
C Charpy impact strength -30 °C kJ/m² ISO 179-1eU 85 85
C Charpy notched impact strength 23 °C kJ/m² ISO 179-1eA 20 30
C Charpy notched impact strength -30 °C kJ/m² ISO 179-1eA 10 10
Flexural modulus 2 mm/min MPa ISO 178-A 9100 5500
Flexural strength 2 mm/min MPa ISO 178-A 280 170
Flexural strain at flexural strength 2 mm/min % ISO 178-A 4 6
Flexural stress at 3.5 % strain 2 mm/min MPa ISO 178-A 260 140

Thermal properties
C Temperature of deflection under load 1.80 MPa °C ISO 75-1,-2 200　
C Temperature of deflection under load 0.45 MPa °C ISO 75-1,-2 210　

Processing conditions for test specimens
C Injection molding-Melt temperature　°C ISO 294 290　
C Injection molding-Mold temperature　°C ISO 294 80